Tips for removing various tape traces, making it no longer troublesome to remove them

I often use transparent tape in daily life, but if I accidentally remove it, it will leave traces, which is very troublesome to remove. Today, the editor will introduce several commonly used tips for removing tape traces.

Removal of transparent gel traces

1. Use an eraser. Eraser to remove transparent gel traces is also very effective, but it is only suitable for small-scale traces.

2. Use a wet towel. This method may be the method we will think of when we first find traces of transparent gel. We can use a wet towel to soak the offset printing area and then wipe it slowly, but this method is limited to areas that are not afraid of sticky.

3. Wipe with alcohol. First of all, when using this method, you must make sure in advance that the area being wiped is not afraid of fading. Use a cloth to stick alcohol and wipe slowly until it is wiped off.

4. Detergent is also effective in removing transparent gel marks, and the steps are the same as other methods.

5. Because ordinary nail wash has chemical components, it is also very effective in removing transparent gel traces.

Removal of double-sided adhesive

1. Don't tear off the layer of paper first, use a hair dryer to heat it, and then take it off after taking it.

2. If there are already dark traces left, you can apply some white oil from home on it, wipe it off with a rag, and wash it with clean water. If there is no white oil at home, you can use syrup oil or swelling oil to repeatedly apply it.

3. If the black mark on the patch is not big, you can use an eraser to erase it. If the area is large, you can use anhydrous alcohol, that is, industrial alcohol, to apply it to the paste position and then wipe it with a cloth.

4. Use a dry cloth stained with vinegar to cover the entire trace. After the double-sided tape is completely wet, you can gently scrape it off with a ruler.

Removal of foam double-sided tape

1. If it is attached to the wall, you can use a pointed object to scrape a small corner, and then press the small corner with your hands to tear it down. This method is tiring, but it will not leave any trace.

2. If you stick it on plastic, dip the towel in hot water first, soak the foam double-sided tape, and then find the small corners and scrape them slowly.

3. If it is applied to the glass, you can try using detergent powder. Take some detergent powder and put it on a semi-wet rag, and wipe it back and forth a few more times. If it is a harder mark, you can first soak the mark and then use decontamination powder.

4. First soak the rag in warm water, then wipe the marks, while wiping, usually spray the dishwashing liquid, and the offset printing will become soft after a while and it will be easy to remove.

Removal of double-sided adhesive on the wall

1. First use degreasing water of nail polish pigment to wipe. Because de-light water can cause the original color of the wall to fall off. This method is recommended to be used in small and insignificant places, and is not recommended for large and conspicuous walls.

2. The heating method is to soften the double-sided adhesive, blow it with a hair dryer, and wait until the double-sided adhesive becomes soft, and the traces can be easily removed.

3. We can take a dry cloth covered with vinegar to cover the entire double-sided adhesive mark. After the sticky stains on the double-sided adhesive are completely wet, we can easily remove them with a ruler.